tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcr ystals.com in keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com the actf465b/465.0/f11 is a compact and economical surface-acoustic wave ( saw ) filter in an f11 package intended for use in mobile radio ( frs & pmr ) applications 1. package dimension (f-11) 2. 3. test circuit pin configuration 1 input / output 4 output / input 2 / 3 case ground dimensions data (unit: mm) a 11.00.3 b 4.50.3 c 3.20.3 d 0.450.1 e 5.00.5 f 2.540.2 issue : 1.1 c1 date : march 2010
tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcr ystals.com in keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com 4. typical frequency response 5. performance 5-1.maximum ratings rating value rf power dissipation p 0dbm dc voltage v dc 10v ac voltage v ac 10v50hz/60hz operation temperature topr -20 to +60 c storage temperature tstg -40 to +85 c issue : 1.1 c1 date : march 2010
tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcr ystals.com in keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com 5-2.electronic characteristics characteristics min. typ. max. unit centre frequency f c -- 465.00 -- mhz user signal band bw -- 3.0 mhz insertion loss il f c 3.0mhz -- 3.5 4.5 db pass band ripple ? f c 3.0mhz -- -- 2.0 db f c - 13.7 ~ f c -7.7mhz 8 -- -- f c -45.8 ~ f c -39.8mhz -- 50 -- rejection level f c +39.8 ~ f c +45.8mhz 45 -- -- db input / output impedance (nominal) 150 w //0pf icaution: electrostatic sensitive device. observe precautions for handling! 1. the frequency f c is defined as the midpoint between the 3db frequencies. 2. unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 test system with vswr 1.2:1. the test fixture l and c are adjusted for minimum insertion loss at the filter centre frequency, f c . note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. the specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. all equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. our liability is only assumed for the surface acoustic wave (saw) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. issue : 1.1 c1 date : march 2010
|
